RC (Resistor-Capacitor) Circuit Calculator

You will need to use the following RC circuit calculator to determine the characteristic frequency of the RC circuit. 

Thus, it can also be employed as the capacitor charge time calculator, or RC time constant calculator, or RC filter calculator. 

The RC circuit is both 

• A low pass filter and 
• A high pass filter 

depending on the needs of an individual. 

RC Circuit 

The RC circuit is covered as one of the basic electrical circuits in which a resistor of resistance R is connected in a series with a capacitor of capacitance C. 

Such a circuit is characterized by a frequency f and has two primary applications: 

• Low/High pass filter and 
• Energy can be stored in a capacitor. 

You can use our RC circuit calculator in the following way: 

• RC filter calculator 

RC Filter Calculator 

The characteristic impedance Z controls the kinds of frequencies that can be present in the circuit. 

The RC circuit attenuates the frequencies below f, while the signal with frequencies above f can easily pass through. 

Still, this is not an absolute case; and signals with the frequencies approximately equal to f are only partially transmitted. 

Depending on how the RC filter is meant to be used, the resistor and capacitor are selected in such a way that it either passes all but the very low or the very high frequency signals. 

These are the high pass and the low pass filters. 

When a low pass filter is engaged together with a high pass filter, you end up with a broadband filter that eliminates all signals, which are below and above a certain frequency. 

Broadband filters are located in all of the music equipment that exists. 

 RC Circuit Calculator 

 The one for the characteristic frequency 

 f of the RC circuit is:

f = 1/ (2πRC)

 This is the RC Network Calculator Formula

Where

• R – Resistor which is the symbol for the measure of resistance in ohms (Ω)
• C – Capacitance of the capacitor (Farads)
• f – The frequency at which the characteristic of the channel was set (in Hertz)

If the frequency is to be calculated, then determine the value of the RC circuit’s resistance as well as capacitance. 

This equation is applicable only to the case when the circuit is an RC circuit. 

An RC Circuit or a resistor-capacitor circuit is made of a resistor with resistance R and a capacitor with capacitance C. 

While utilizing this formula, the resistor or resistors are incorporated in a series 

There are two principal applications of an RC Circuit. 

One, to select using the frequency, or to charge using the capacitor. 

It should also be noted that the total energy which can be stored in a circuit solely depends on capacitance while the rate of charge depends upon the resistor.

What is RC in Calculator?

This online calculator tool performs multiplication of the resistance and capacitance values and represents the RC time constant.

Click here for more Electrical Calculators