Australia (AS) / New Zealand (NZS) Electrical & Electronics Standards

By
Rabert T
-
0
262
Australia (AS) / New Zealand (NZS) Electrical & Electronics Standards
Australia (AS) / New Zealand (NZS) Electrical & Electronics Standards

The electrical and electronics industries in Australia & New Zealand are subject to an extensive collection of standards that ensure safety, performance, & dependability. 

These standards, developed collaboratively by Standards Australia and Standards New Zealand, address a wide range of issues with electrical installations, product safety, & operational requirements.

Objective of Electrical Standards

The primary objective of electrical standards is to develop safety measures and verify that all electrical installations, devices, & systems follow applicable laws and regulations. 

They help to reduce the danger of electrical accidents, improve the quality of electrical infrastructure, & provide maintenance and testing standards.

Standards Key Topics

  1. Electrical Installations (Wiring Rules)
  2. Cable Selection and Installation
  3. In-Service Safety and Testing
  4. Grid Connection and Renewable Energy
  5. Electrical Safety in Hazardous Areas
  6. Low-Voltage Switchgear and Controlgear

Importance of Compliance

Compliance with Australian & New Zealand electrical standards is not just a legal obligation; it is also essential for protecting people, property, and the environment. Compliance with these standards assures that electrical systems & products are safe, dependable, and efficient.

Australia (AS) / New Zealand (NZS) Standards

StandardsDescription
ACA TS 102-1998Telecommunication Technical Standard
ACIF G512:1998Overview Of The Industry Number Management Service Architecture And Information Exchange Guidelines
AS 1049.1-2008Telecommunication Cables – Insulation, Sheath And Jacket – Materials
AS 1049.2-2008Telecommunication Cables: Testing Methods For Insulation, Sheath, And Jacket
AS 1243-1982Voltage Transformers For Measurement And Protection
AS 1345-1995Identification Of The Contents Of Pipes, Conduits And Ducts
AS 1680.3-1991Interior Lighting: Photometric Data Measurement, Calculation, And Presentation
AS 1746-1991Conductors – Bare Overhead – Hard-Drawn Copper
AS 1798-1992Lighting Poles And Bracket Arms – Preferred Dimensions
AS 1824.1-1995Principles, Rules, And Definitions For Insulation Coordination
AS 2184-1985Low Voltage Switchgear And Control Gear – Moulded-Case Circuit-Breakers For Rated Voltages Up TP And Including 600 V AC And 250 V DD
AS 2756-1997Low Voltage Switchgear And Control Gear – Mounting Rails For Mechanical Support Of Electrical Equipment
AS 3720-2008Measurement Of Power-Frequency Electric Fields
AS 3851-1991The Calculation Of Short-Circuit Currents In Three-Phase AC Systems
AS 3865-1991Effects Of The Short-Circuit Currents Calculation
AS 4070-1992Recommended Actions To Prevent Damage To Low-Voltage Electrical Equipment And Installations In Men
Systems From Transient Over Voltages
AS 4111-1993Starters For Fluorescent Lamps – Performance Requirements
AS 4278-1995A Procedure To Evaluate The Short-Circuit And Strength Of Particularly Type-Tested Assemblies
AS 4702-2000Polymeric Cable Protection Covers
AS 60038-2012Standard Voltages
AS 60269.1-2005Low-Voltage Fuses – General Requirements
AS 60417.1-2004Overview And Application Of Graphical Symbols For Use On Equipment
AS 60529-2004Degrees Of Protection Provided By Enclosures
AS 60947.1:2004Low-Voltage Switchgear And Controlgear – General Rules
AS 60947.2:2005Low-Voltage Switchgear And Control Gear – Circuit Breakers
AS 60947.4.1:2004Low-Voltage Switchgear And Controlgear – Contactors And Motor-Starters – Electromechanical Contactors And Motor-Starters
AS 60947.4.2:2004Low-Voltage Switchgear And Controlgear – Contactors And Motor-Starters – AC Semiconductor Motor Controllers And Starters
AS 60947.5.1:2004Low Voltage Switchgear And Controlgear – Control Circuit Devices And Switching Elements -Electromechanical Control Circuit Devices
AS 60947.5.2:2004Low-Voltage Switchgear And Controlgear – Control Circuit Devices And Switching Elements – Proximity Switches
AS 60947.5.4:2004Low-Voltage Switchgear And Controlgear – Control Circuit Devices And Switching Elements – Methods Of Evaluating Low-Energy Contact Performance: Special Tests
AS 60947.6.2:2004Low-Voltage Switchgear And Controlgear – Multiple Function Equipment – Control And Protective Switching Devices
AS 60947.7.1:2004Low-Voltage Switchgear And Control Gear – Ancillary Equipment – Terminal Blocks For Copper Conductors
AS 60947.7.2:2004Low-Voltage Switchgear And Control Gear – Ancillary Equipment – Protective Conductor Terminal Blocks For Copper Conductors
AS/CA S008:2010Requirements For Customer Cabling Products
AS/CA S009:2013Installations Requirements For Customer Cabling ( Wiring Rules)
AS/NZS 1574:1996Copper And Copper Alloys – Wire For Electrical Purposes
AS/NZS 1660.1:1998Test Methods For Electric Cables, Cords And Conductors – Conductors And Metallic Components
AS/NZS 2053.1:2001Conduits And Fittings For Electrical Installations – General Requirements
AS/NZS 2053.2:2001Fittings And Conduits For Electronic Installations – Rigid Plain  Conduits And Insulation Material Fittings
AS/NZS 2053.3:1995Conduits And Fittings For Electrical Installations – Rigid Plain Conduits And Fittings Of Fibre-Reinforced Concrete Material
AS/NZS 2053.4:1995Flexible Plastic Conduits & Fittings For Insulating Materials Used In Electrical Installations
AS/NZS 2053.5:2001Conduits And Fittings For Electrical Installations – Corrugated Conduits And Fittings Of Insulating Material
AS/NZS 2053.6:2001Conduits & Fittings For Electrical Installations: Smooth-Bore, Profile-Wall, And Smooth-Conduct And Insulating Material
AS/NZS 2053.7:2002Conduits And Fittings For Electrical Installations – Rigid Metal Conduits And Fittings
AS/NZS 2053.8:1995Conduits And Fittings For Electrical Installations – Flexible Plain Conduits And Fittings of Metal or Composite Material
AS/NZS 2373:2003Twisted Pair Electrical Cables For Protection And Control Circuits
AS/NZS 2893:2002Electric Cables – Lead And Lead Alloy Sheaths – Composition
ACA TS 102-1998Telecommunication Technical Standard
AS/NZS 3000:2007Electrical Installations (Known As The Australian/New Zealand Wiring Rules)
AS/NZS 3002-2008Electrical Installation – Shows And Carnivals
AS/NZS 3003:2011Electrical Installations – Patient Treatment Areas Of Hospitals And Medical, Dental Practices And Dialyzing Locations
AS/NZS 3004.1:2008Electrical Installations For Marinas & Recreational Boats
AS/NZS 3004.2:2008Electrical Installations – Marinas And Recreational Boats – Recreational Boats Installations
AS/NZS 3008.1.1:2009Electrical Installations – Selection Of Cables – Cables For Alternating Voltages Up To And Including 0.6/1KV – Typical Australian Installation Conditions
AS/NZS 3010:2005Electrical Installation – Generating Sets
AS/NZS 3012:2010Electrical Installation – Construction And Demolition Sites
AS/NZS 3100:2009Approval And Test Specification – General Requirements For Electrical Equipment
AS/NZS 3111:2009Approval And Test Specification – Miniature Overcurrent Circuit-Breakers
AS/NZS 3117:2007Approval And Test Specification – Bayonet Lamp Holders
AS/NZS 3133-2008Approval And Test Specification – Air Break Switches
AS/NZS 3136:2001Approval And Test Specification – Electrical Equipment For Spa And Swimming Pools
AS/NZS 3140:2007Approval And Test Specification – Edison-Type Screw Lamp Holders
AS/NZS 3439.1:2002Low Voltage Switchgear And Controlgear – Type-Tested And Partially Type-Tested Assemblies
AS/NZS 3439.2:2002Low Voltage Switchgear And Controlgear Assemblies – Particular Requirements For Busbar Trunking Systems (Busways)
  AS/NZS 3439.3:2002Low Voltage Switchgear And Controlgear Assemblies – Particular Requirements For Low Voltage Switchgear And Controlgear Assemblies Intended To Be Installed In Places Where Unskilled Persons have Access For Their Use – Distribution Boards
AS/NZS 3439.4-2009Low Voltage Switchgear And Controlgear Assemblies – Particular Requirements For Assemblies For Construction Sites
AS/NZS 3439.5:2009Low-Voltage Switchgear And Controlgear Assemblies-Particular Requirements For Assemblies For Power Distribution In Public Networks
AS/NZS 3760:2010In-Service Safety Inspection And Testing of Electrical Equipment
AS/NZS 3808:2000Insulation And Sheathing Materials For Electric Cables
AS/NZS 3820:2009Essential Safety Requirements For Low Voltage Electrical Equipment
AS/NZS 3827.1:1998Lighting System Performance – Accuracies And Tolerances – Overview And General Recommendations
AS/NZS 3827.2:1998Lighting System Performance – Accuracies And Tolerances – Compliance Requirements
AS/NZS 3832:1998Electrical Installations – Cold Cathode Illumination Systems
AS/NZS 3863:2002Galvanized Mild Steel Wire For Amounting Cables
AS/NZS 3947.3:2001Low-Voltage Switchgear And Control Gear – Switches, Disconnectors, Switch Disconnectors And Fuse- Combination Units
AS/NZS 3947.4.3:2000Low Voltage Switchgear And Controlgear – Contactors And Motor Starters – Ac Semiconductor Controllers And Contactors For Non-Motor
AS/NZS 3947.5.3:2000Low-Voltage Switchgear And Controlgear – Control Circuit Devices And Switching Elements – Requirements For Proximity Devices With Define Behaviour Under Fault Conditions
AS/NZS 3947.5.5:2000Low-Voltage Switchgear And Controlgear – Control Circuit Devices And Switching Elements – Electrical Emergency Stop Device With Mechanical Latching Function
AS/NZS 3947.5.6:2000Low Voltage Switchgear And Controlgear – Control Circuit Devices And Switching Elements – Dc Interface For Proximity Sensors And Switching Amplifiers (Namur)
AS/NZS 3947.6.1:2001Low-Voltage Switchgear And Controlgear – Multiple Function Equipment – Automatic Transfer Switching Equipment
AS/NZS 4325.1:1995Compression And Mechanical Connectors For Power Cables With Copper or Aluminium Conductors – Test Methods And Requirements
AS/NZS 4836:2011Safe Working on Low-Voltage Electrical Installations
AS/NZS 5000.1:2005Electrical Cables – Polymeric Insulated – For Working Voltages Up To And Including 0.6/1KV
AS/NZS 5000.2:2006Electric Cables – Polymeric Insulated – For Working Voltages Up To And Including 450/750 V
AS/NZS 60155:2000Glow-Starters For Fluorescent Lamps
AS/NZS 60269.1:2005Low-Voltage Fuses – General Requirements
AS/NZS 60432.1:2007Incandescent Lamps – Safety Specifications – Tungsten Filament Lamps For Domestic And Similar General Lighting Purposes
AS/NZS 60598.1:2013Luminaries – General Requirements And Tests
AS/NZS 60598.2.1:1998Luminaries – Particular Requirements – Fixed General Purpose Luminaires
AS/NZS 60598.2.2:2001Luminaries – Particular Requirements – Recessed Luminaires
AS/NZS 60598.2.20:2002Luminaires – Particular Requirements – Lighting Chains
AS/NZS 60598.2.23:2002Luminaries – Particular Requirements – Extra Low-Voltage Lighting Systems For Filament Lamps
AS/NZS 60890-2009A Method Of Temperature-Rise Assessment By Extrapolation For Partially Type-Tested Assemblies Of Low- Voltage Switchgear And Control Gear
ACA TS 102-1998Telecommunication Technical Standard
AS/NZS 60921:2002Ballasts For Tubular Fluorescent Lamps – Performance Requirements
AS/NZS 60922:1998Auxiliaries For Lamps – Ballasts For Discharge Lamps (Excluding Tubular Fluorescent Lamps)- General And Safety Requirements
AS/NZS 60923:1998Auxiliaries For Lamps – Ballasts For Discharge Lamps (Excluding Tubular Fluorescent Lamps)- Performance Requirements
AS/NZS 60928:2000Auxiliaries For Lamps – Ac Supplied Electronic Ballasts For Tubular Fluorescent Lamps – General And Safety Requirements
AS/NZS 60929:2005Auxiliaries For Lamps – Ac Supplied Electronic Ballasts For Tubular Fluorescent Lamps – Performance Requirements
AS/NZS 60968:2001Self-Ballasted Lamps For General Lighting Services – Safety Requirements
AS/NZS 60969:2001Self-Ballasted Lamps For General Lighting Services – Performance Requirements
AS/NZS 60990:2002Methods Of Measurement Of Touch Current And Protective Conductor Current
AS/NZS 61000.1.1:2000Electromagnetic Compatibility – General – Application And Interpretation Of Fundamental Definitions And Terms
AS/NZS 61000.3.100-2011Electromagnetic Compatibility (EMC) – Limits – Steady State Voltage Limits In Public Electricity Systems
AS/NZS 61000.3.12:2013Electromagnetic Compatibility – Limits For Harmonic Currents Produced By Equipment Connected To Public
Low-Voltage Systems With Input Current > 16A And <=75 A Per Phase
AS/NZS 61000.3.2:2013Electromagnetic Compatibility – Limits For Harmonic Current Emissions (Equipment Input Current Less Than Or Equal To 16 A Per Phase
AS/NZS 61000.3.4:2007Electromagnetic Compatibility – Part 3.4: Limitation Of Emission Of Harmonic Currents In Low-Voltage Power Supply Systems For Equipment With Rated Current Greater Than 75A
 Electromagnetic Compatibility – Testing And Measurement Techniques – General Guide On Harmonics And
AS/NZS 61000.4.7:2012Interharmonics Measurements And Instrumentation For Power Supply Systems And Equipment Connected
AS/NZS 61000.6.1:2006Electromagnetic Compatibility – Generic Immunity Standard – Residential Commercial And Light Industry
AS/NZS 61009.1:2011Residual Current Operated Circuit-Breakers With Integral Overcurrent Protection For Household And Similar Uses
AS/NZS 61046:2001Auxiliaries For Lamps – DC or AC Supplied Electronic Step-Down Convertors For Filament Lamps – General And Safety Requirements
AS/NZS 61047:2001Auxiliaries For Lamps – DC or AC Supplied Electronic Step-Down Convertors For Filament Lamps – General And Performance Requirements
AS/NZS 61048:2002Auxiliaries For Lamps – Capacitors For Use In Tubular Fluorescent And Other Discharge Lamp Circuits – General Safety Requirements
AS/NZS 61049:2002Auxiliaries For Lamps – Capacitors For Use In Tubular Fluorescent And Other Discharge Lamp Circuits – Performance Requirements
AS/NZS 61050:1998Transformers For Tubular Discharge Lamps Having No-Load Output Voltage Exceeding 1000V – General And Safety Requirements
AS/NZS 61058.1:2008Switches For Appliances – General Requirements
AS/NZS 61210:2002Connecting Devices – Flat Quick-Connect Terminations For Electrical Copper Conductors – Safety Requirements
AS/NZS 61231:2001International Lamp Coding System (ILCOS)
AS/NZS 61347.1:2002Lamp Control Gear – General And Safety Requirements
AS/NZS 61347.2.1:2002Lamp Control Gear – Particular Requirements For Starting Devices (Other Than Glow Starters)
AS/NZS 61347.2.3:2004Lamp Control Gear – Particular Requirements For AC Supplied Electronic Ballasts For Fluorescent Lamps
AS/NZS 61347.2.8:2003Lamp Control Gear – Particular Requirements For Ballasts For Fluorescent Lamps
AS/NZS 61347.2.9:2004Lamp Control Gear – Particular Requirements For Ballasts For Discharge Lamps (Excluding Fluorescent Lamps) (IEC 1347-2-9:2000 MOD)
AS/NZS 61459:2000Low-Voltage Fuses – Coordination Between Fuses And Contactors/Motor-Starters – Application Guide
AS/NZS 61535:2011Installation Couplers – General Requirements
AS/NZS 61558.1:2008Safety Of Power Transformers, Power Supply Units And Similar – General Requirements And Tests
AS/NZS 61558.2.17:2001Safety Of Power Transformers, Power Supply Units And Similar Devices – Particular Requirements For Transformers For Switch Mode Power Supplies
AS/NZS 61558.2.23:2011Safety Of Power Transformers, Power Supply Units And Similar Devices – Particular Requirements For Transformers For Construction Sites
AS/NZS 61558.2.3:2011Safety Of Power Transformers, Power Supply Units And Similar Devices – Particular Requirements For Ignition Transformer For Gas And Oil Burners
AS/NZS 61558.2.4:2009Safety Of Power Transformers, Power Supply Units And Similar Devices – Particular Requirements For Isolating Transformers For General Use
AS/NZS 61558.2.6:2009Safety Of Power Transformers, Power Supply Units And Similar Devices – Particular Requirements For Safety Isolating Transformers For General Use
AS/NZS IEC 61935.1:2012Specification For The Testing Of Balanced And Coaxial Information Technology Cabling – Installed Balanced
Cabling As Specified In ISO/IEC 11801 And Related Standards (IEC 61935-1, Ed.3.0 (2009) MOD)
AS/NZS IEC 61935.2:2006Testing Of Balanced Communication Cabling In Accordance With ISO/IEC 11801 – Patch Cords and Work Area and Cords
AS/NZS ISO/IEC 15018:2005Telecommunications Installations – Integrated Telecommunications Cabling Systems For Small Office/Home And Office Premises
ACA TS 102-1998Telecommunication Technical Standard
AS/NZS ISO/IEC 24702:2007Telecommunications Installations – Generic Cabling – Industrial Premises
AUSTEL TS 027-1996End-To-End Network Performance
TR 61340.5.1-2005Electrostatics – Protection Of Electronic Devices From Electrostatic Phenomena – General Requirements
TR 61340.5.2-2005Electrostatics – Protection Of Electronic Devices From Electrostatic Phenomena – User Guide
AS/CA S003.2:2010Requirements For Customer Access Equipment For Connection To A Telecommunications Network<Br>Part 2: Analogue And TDM Based Technologies
AS/CA S003.3:2010Requirements For Customer Access Equipment For Connection To A Telecommunications Network<Br>Part 3: Packet And Cell Based Technologies
AS/ACIF S004:2008Voice Frequency Performance Requirements For Customer Equipment
AS/ACIF S006:2008Requirements For Customer Equipment, Operating In The Voice Band, For Connection To The Non-Switched Telecommunications Network
AS/ACIF S016:2001Requirements For Customer Equipment For Connection To Hierarchical Digital Interfaces
AS/ACIF S031:2001Requirements For ISDN Basic Access
AS/ACIF S035:2008Requirements For Installation Of Temporary Field Telecommunications Customer Cabling For Defence Purposes
AS/ACIF S038:2001Requirements For ISDN Primary Rate Access Interface
AS/ACIF S040:2001Requirements For Customer Equipment For Use With The Standard Telephone Service – Features For Special Needs
AS/ACIF S041.1:2009Requirements For DSL Customer Equipment For Connection To The PSTN – Part 1: General
AS/ACIF S041.2:2009Requirements For DSL Customer Equipment For Connection To The Public Switched Telephone Network – Part 2: Modems For Use In Connection With All DSL Services
AS/ACIF S041.3:2009Requirements For DSL Customer Equipment For Connection To The Public Switched Telephone Network – Part 3: Filters For Use In Connection With All ADSL Services
AS/CA S042.1:2010Requirements For Connection To An Air Interface Of A Telecommunications Network – Part 1: General
AS/ACIF S042.3:2005Requirements For Connection To An Air Interface Of A Telecommunications Network – Part 3: GSM
AS/CA S042.4:2010Requirements For Connection To An Air Interface Of A Telecommunications Network—Part 4: Imt-2000 Customer Equipment
AS/ACIF S043.1:2003Requirements For Customer Equipment For Connection To A Metallic Local Loop Interface Of A Telecommunications Network- Part 1: General
AS/ACIF S043.2:2008Requirements For Customer Equipment For Connection To A Metallic Local Loop Interface Of A Telecommunications Network – Part 2: Broadband
AS/ACIF S043.3:2008Requirements For Customer Equipment For Connection To A Metallic Local Loop Interface Of A Telecommunications Network Part 3: DC, Low Frequency AC And Voice Band
AS 4741-2010Testing Of Connections To Low Voltage Electricity Networks
AS 4755.3.1-2008Demand Response Capabilities And Supporting Technologies For Electrical Products-Interaction Of Demand Response Enabling Devices And Electrical Products-Operational Instructions And Connections For Air Conditioners
ACA TS 002-1997Analogue Interworking And Non-Interference Requirements For Customer Equipment Connected To The Public Switched Telephone Network
ACA TS 003-1997Customer Switching Systems Connected To The Public Switched Telephone Network
ACA TS 004-1997Voice Frequency Performance Requirements For Customer Equipment
ACA TS 006-1997General Requirements For Customer Equipment Connected To The Non-Switched Telephone Network
ACA TS 007-1997General Requirements For Customer Equipment Connected To The Telex Network
ACA TS 008-1997Requirements For Authorised Cabling Products
AS ISO/IEC 21000.3-2004Information Technology-Multimedia Framework (Mpeg-21) – Digital Item Identification
AS/NZS 3105:2007Approval And Test Specification-Electrical Portable Outlet Devices
AS/NZS 3112:2011Approval And Test Specification-Plugs And Socket-Outlets
AS/NZS 3120:2011Approval And Test Specification-Cord Extension Sockets
AS/NZS 3128:1998Approval And Test Specification–Portable Lamp Standards And Brackets
AS/NZS 3160:2009Approval And Test Specification–Hand-Held Portable Electric Tools
AS/NZS 3190:2011Approval And Test Specification–Residual Current Devices (Current-Operated Earth-Leakage Devices)
AS/NZS 3191:2008Electric Flexible Cords
AS/NZS 3350.1:2002Safety Of Household And Similar Electrical Appliances- General Requirements
AS/NZS 4805.2:2007Accessories For Electric Cables-Test Requirements-Impregnated Paper-Insulated Metal-Sheathed Cables For Rated Voltages From 1.9/3.3 (3.6) KV Up To And Including 19/33 (36) KV (Excluding Gas-Pressure And Oil-Filled Cables)
AS 60269.2.0-2005Low-Voltage Fuses- Supplementary Requirements For Fuses For Use By Authorized Persons (Fuses Mainly For Industrial Application)
AS 60269.2.1-2005Low-Voltage Fuses- Supplementary Requirements For Fuses For Use By Authorized Persons (Fuses Mainly For Industrial Application}-Sections I To VI: Examples Of Types Of Standardized Fuses
AS 60269.3.0-2005Low-Voltage Fuses- Supplementary Requirements For Fuses For Use By Unskilled Persons (Fuses Mainly For Household And Similar Applications)
ACA TS 102-1998Telecommunication Technical Standard
AS 60269.3.1-2005Low-Voltage Fuses- Supplementary Requirements For Fuses For Use By Unskilled Persons (Fuses Mainly For Household And Similar Applications) -Sections I To IV: Examples Of Types Of Standardized Fuses
AS 60269.4.0-2005Low-Voltage Fuses- Supplementary Requirements For Fuse-Links For The Protection of Semiconductor Devices
AS 60269.4.1-2005Low-Voltage Fuses- Supplementary Requirements For Fuse-Links For The Protection Of Semiconductor Devices-Sections I To III-Examples Of Types Of Standardized Fuse- Links
AS/NZS 60898.1 :2004Electrical Accessories-Circuit-Breakers For Overcurrent Protection For Household And Similar Installations- Circuit-Breakers For A.C. Operation
AS/NZS 60898.2:2004Circuit-Breakers For Overcurrent Protection For Household And Similar Installations-Circuit-Breakers For A.C. And D.C. Operation
AS 60947.5.7-2004Low-Voltage Switchgear And Controlgear- Control Circuit Devices And Switching Elements-Requirements For Proximity Devices With Analogue Output
AS 60947.7.3-2004Low-Voltage Switchgear And Control Gear- Ancillary Equipment-Safety Requirements For Fuse Terminal Blocks
AS/NZS 61008.1:2011Residual Current Operated Circuit-Breakers Without Integral Overcurrent Protection For Household And Similar Uses (RCCBs)-General Rules
AS 61818-2005Application Guide For Low-Voltage Fuses
AS 60034.5-2009Rotating Electrical Machines–Degrees Of Protection Provided By The Integral Design Of Rotating Electrical Machines (IP Code) – Classification
AS 1049-2000Telecommunication Cables-Insulation, Sheath And Jacket
AS/NZS 2276.1 :2004Cables For Traffic Signal Installations-Multicore Power Cables
AS/NZS 3008.1.2:2010Electrical Installations-Selection Of Cables- Cables For Alternating Voltages Up To And Including 0.6/1 KV- Typical New Zealand Conditions
AS/NZS 3166:1993Approval And Test Specification-Cables For High Voltage Luminous Discharge Tube Installations
AS/NZS 4961:2003Electric Cables-Polymeric Insulated-For Distribution And Service Applications
AS/NZS 5000.3:2003Electric Cables-Polymeric Insulated-Multicore Control Cables
AS/NZS 60227.5:2003Polyvinyl Chloride Insulated Cables Of Rated Voltages Up To And Including 4501750 V-Flexible Cables (Cords)
AS/NZS CISPR 16.1.3:2004Specification For Radio Disturbance And Immunity Measuring Apparatus And Methods- Radio Disturbance And Immunity Measuring Apparatus-Ancillary Equipment-Disturbance Power
AS/NZS CISPR 16.1.5:2004Specification For Radio Disturbance And Immunity Measuring Apparatus And Methods–Radio Disturbance And Immunity Measuring Apparatus-Antenna Calibration Test Sites For 30 MHz To 1000 MHz
AS/NZS CISPR 16.2.1:2006Specification For Radio Disturbance And Immunity Measuring Apparatus And Methods-Methods Of Measurement Of Disturbances And Immunity-Conducted Disturbance Measurements
AS/NZS CISPR 16.2.2:2006Specification For Radio Disturbance And Immunity Measuring Apparatus And Methods-Methods Of Measurement Of Disturbances And Immunity-Measurement Of Disturbance Power
AS/NZS CISPR 16.2.3:2004Specification For Radio Disturbance And Immunity Measuring Apparatus And Methods-Methods Of Measurement Of Disturbances And Immunity-Radiated Disturbance Measurements
AS/NZS CISPR 16.2.4:2004Specification For Radio Disturbance And Immunity Measuring Apparatus And Methods-Methods Of Measurement Of Disturbances And Immunity-Immunity Measurements
AS/NZS CISPR 16.4.1:2006Specification For Radio Disturbance And Immunity Measuring Apparatus And Methods-Uncertainties, Statistics And Limit Modelling-Uncertainties In Standardized EMC Tests
AS/NZS CISPR 16.4.2:2004Specification For Radio Disturbance And Immunity Measuring Apparatus And Methods-Uncertainties, Statistics And Limit Modelling-Uncertainty In EMC Measurements
AS/NZS CISPR 16.4.3:2004Specification For Radio Disturbance And Immunity Measuring Apparatus And Methods- Uncertainties, Statistics And Limit Modelling–Statistical Considerations In The Determination Of EMC Compliance Of Mass- Produced Products
AS/NZS CISPR 16.4.4:2004Specification For Radio Disturbance And Immunity Measuring Apparatus And Methods-Uncertainties, Statistics And Limit Modelling-Statistics Of Complaints And A Model For The Calculation Of Limits
AS 4294(INT)-1995Amps Receiver Immunity To Interfering Signals. Employing Amplitude Modulation
AS/NZS 61000.4.14:2007Electromagnetic Compatibility (EMC) – Testing And Measurement Techniques-Voltage Fluctuation Immunity Test
AS/NZS 61000.4.34:2007Electromagnetic Compatibility (EMC) – Testing And Measurement Techniques-Voltage Dips, Short Interruptions And Voltage Variations Immunity Tests For Equipment With Input Current More Than 16A Per Phase
AS/NZS 4782.1:2004Double-Capped Fluorescent Lamps- Performance Specifications-General (IEC 60081 :2000, MOD)
AS/NZS 4782.2:2004Double-Capped Fluorescent Lamps- Performance Specifications-Minimum Energy Performance Standard (MEPS)
AS/NZS 4782.3(INT):2006Double-Capped Fluorescent Lamps- Performance Specifications-Procedure For Quantitative Analysis Of Mercury Present In Fluorescent Lamps
AS/NZS 4783.1:2001Performance Of Electrical Lighting Equipment- Ballasts For Fluorescent Lamps-Method Of Measurement To Determine Energy Consumption And Performance Of Ballasts Lamp Circuits
AS/NZS 4783.2:2002Performance Of Electrical Lighting Equipment- Ballasts For Fluorescent Lamps-Energy Labelling And Minimum Energy Performance Standards Requirements
AS/NZS 4847.1:2010Self-Ballasted Lamps For General Lighting Services-Test Methods-Energy Performance
AS/NZS 4847.2:2010Self-Ballasted Lamps For General Lighting Services-Minimum Energy Performance Standards (MEPS) Requirements
AS/NZS 60901:2003Single-Capped Fluorescent Lamps-Performance Specifications
ACA TS 102-1998Telecommunication Technical Standard
AS/NZS 60238:2007Edison Screw Lamp Holders (IEC 60238, Ed.8.0 (2004) MOD)
AS/NZS 61184:2007Bayonet Lamp Holders (IEC 61184, Ed. 2.0 (1997) MOD)
AS/NZS 3113:2005Approval And Test Specification-Ceiling Roses
AS/NZS 4293: 1995International Lamp Coding System (ILCOS)
AS/NZS 61347.2.2:2007Lamp Control Gear-Particular Requirements For D.C. Or A.C. Supplied Electronic Step-Down Convertors For Filament Lamps (LEC 61347-2-2, Ed. 1.2 (2006) MOD)
AS/NZS 61347.2.4:2002Lamp Control Gear-Particular Requirements For D.C. Supplied Electronic Ballasts For General Lighting
AS/NZS 61347.2.11:2003Lamp Control Gear-Particular Requirements For Miscellaneous Electronic Circuits Used With Luminaires (IEC 61347-2-11:2001, MOD)
AS 2293 SET-2005Emergency Escape Lighting And Exit Signs Set
AS/NZS 4879.1:2008Performance Of Transformers And Electronic Step-Down Convertors For El V Lamps-Test Method-Energy Performance
AS/NZS 60598.2.22:2005Luminaires-Particular Requirements- Luminaires For Emergency Lighting (IEC 60598-2-22, Ed. 3.1(2002) MOD)
AS 4509.3-1999Stand-Alone Power Systems-Installation And Maintenance
AS/NZS 4665.1:2005Performance Of External Power Supplies-Test Method And Energy Performance Mark
AS/NZS 4665.2:2005Performance Of External Power Supplies- Minimum Energy Performance Standard (MEPS) Requirements
AS 62208-2006Empty Enclosures For Low-Voltage Switchgear And Controlgear Assemblies-General Requirements
AS 1852.441-1985International Electrotechnical Vocabulary- Switchgear, Control Gear And Fuses
AS 2467-2008Maintenance Of Electrical Switchgear
AS 1852.605-1988International Electrotechnical Vocabulary- Generation, Transmission And Distribution Of Electricity And Substations

Click Here for Indian Standards (IS)

Click Here for IEC Standards (IEC)

Conclusion

The Australian & New Zealand standards for electrical & electronic systems are extensive, covering all aspects of electrical installations, equipment safety, and operational procedures. These criteria guarantee the appropriate operation of electrical systems between nations and help to preserve high safety levels in the sector.

RELATED ARTICLESMORE FROM AUTHOR